Browse all practice questions for the Electrical Engineering (EE) Laws Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Electrical Engineering (EE) Laws Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which of the following is not listed as a penalty option in Section 40?
  • In high-voltage equipment, what is the process of insulation coordination?
  • What is the fundamental difference between grounding and bonding?
  • Explain the difference between tort liability and contract liability for engineers.
  • Which statement best describes the NFPA 70E standard's scope in electrical safety?
  • What is the purpose of continuing professional development for licensed engineers?
  • Who served as chairman of the Board of Electrical Engineering when the Code of Ethics RA 7920 was approved?
  • What is NERC CIP and why is it important for electrical utilities?
  • What is the statute of limitations and how does it affect professional claims against engineers?
  • Why is the Short-Circuit Current Rating (SCCR) important in electrical assemblies?
  • Why are permits and inspections required prior to energizing electrical installations?
  • What best describes dual-use items in export controls?
  • What is the role of the statutory professional code of ethics in state boards?
  • What is the difference between hazardous location Class I and Class II as defined by NEC?
  • What is due care in professional practice, and how is it demonstrated?
  • Define "responsible charge" in professional practice and its relevance to professional engineers.
  • Which Republic Act provides framework for the restructuring of the electric power industry including privatization of NPC assets and transition to the desired competitive structure?
  • Which of the following is not a part of the requirements to take the REE examination?
  • What is the role of UL listings in product safety compliance, and are they federal law?
  • What is the primary safety objective of a facility grounding system design?
  • Which component provides a return path for fault current to ensure protective devices operate?
  • Under Rule 19, results of the examination shall be released not later than how many days from the date of the exam?
  • PRC was created under which Presidential Decree?
  • Which law governs the sale of electrical products and their safety in the U.S. at the federal level?
  • How does the concept of constructive fraud differ from fraud in engineering practice?
  • What is the weight percent of mathematics subjects?
  • Which term completes the four sectors of RA 9136: generation, transmission, distribution, and ______?
  • What is the importance of maintaining continuing professional development for licensed engineers?
  • What is the number designation of the old Electrical Engineering Law?
  • GMC stands for what?
  • NFPA 70E is published to address electrical safety in the workplace. Is it typically mandatory by law?
  • Who approves the official release of examination results?
  • Which statement best describes the impact of energy efficiency standards on power electronics design?
  • Under licensure acts, which scenario would most clearly require licensure?
  • What is the function of an equipment grounding conductor (EGC)?
  • Which document governs contracting for government electrical engineering projects, including competition and warranties?
  • How does NFPA 70E define arc flash hazard and what is the importance of safe work practices?
  • Name two major U.S. electrical safety codes and their primary focus.
  • What is the primary purpose of formal change management in electrical project contracts?
  • SEC 4 of ARTICLE 11 states the power and duties of the Board. What does quasi-legislative mean?
  • A certificate of ________ shall be issued by the Board, subject to the approval of the Commission, to Professional Electrical Engineers who have been screened and recommended by IIEE.
  • What is the standard of care in professional engineering practice?
  • SEC 4 of ARTICLE II states the powers and duties of the Board. What does quasi-judicial mean?
  • Which IP protection guards confidential information that is not generally known?
  • Which statement describes NEC 690.12 rapid shutdown?
  • What is the primary purpose of professional engineering licensure and who typically grants it in most jurisdictions?
  • What is an arc-fault circuit interrupter (AFCI) and what does it protect against?
  • NGCP warns which color alert if a tropical disturbance is expected to make landfall within 24 hours?
  • Interconnection standards such as IEEE 1547 address protection and islanding. Which term describes preventing a distributed energy resource from continuing to energize a circuit during utility outages?
  • Which NEC section requires a readily accessible service disconnect for dwelling units?
  • Which statement correctly assigns the ranges for RA 7920 Article IV and Article V?
  • Which entity is responsible for licensing in electrical engineering according to the material?
  • Which process helps avoid scope creep and disputes when changes occur in a project?
  • According to RA 7920, the members of the BEE shall hold office for a term of how many years?
  • RA 7920 was approved on which date?
  • Which hazard location classification addresses combustible dust?
  • May is declared as the electrical safety month in virtue of which proclamation signed by President Benigno Aquino III on June 27, 2011?
  • Which statement correctly lists the main steps to become a licensed Professional Engineer in the United States?
  • Applicants for the registered master electrician's examination must be at least _____ years of age.
  • The new Electrical Engineering law originated from House Bill No. ______ and Senate Bill No. ______.
  • Which standard relates to interconnection of distributed energy resources (DER) with the grid?
  • Which standard provides guidance on harmonic control in electrical power systems?
  • RA 7920 was approved by which president?
  • IEEE 519 and what does it govern?
  • Which NEC articles cover wiring methods and installation details for electrical conductors?
  • Which of the following is a likely consequence of breaching confidentiality in professional practice?
  • Who is the present chairman of the board of Electrical Engineering?
  • Which forms of intellectual property protection apply to electrical inventions and related software?
  • What rules are included in Article V of RA 7920?
  • Which statement best describes the difference between indemnities and warranties in a professional service contract?
  • Which outcome best captures the aim of a facility grounding system design?
  • Which statement about a professional engineer's seal is true?
  • What is the required passing general average for the REE board examination if no grade is below 50 percent in any subject?
  • What is a ground-fault circuit interrupter (GFCI) and where is it typically required by NEC?
  • Article III, Rule 7 of RA7920 addresses which topic?
  • What is professional liability insurance (E&O) and why is it important for PEs?
  • Which NEC article covers electrical energy storage systems (batteries) and where are they primarily covered?
  • Why are deliverables included in a professional service contract?
  • RA 7920 Article IV concerns which set of rules?
  • Which color alert is used to indicate a contingency reserve deficiency?
  • How do energy efficiency standards affect the design of power electronics?
  • What is the term used when an American citizen is allowed to practice his profession, e.g. electrical engineering, here in the Philippines?
  • Which agency administers energy efficiency standards under EPCA?
  • Which standard specifically covers electrical equipment preventive maintenance?
  • PRC Renewal Law corresponds to which Republic Act number?
  • PSALM stands for which of the following?
  • What is IEEE 1584 used for in electrical safety analysis?
  • What is a "seal" in professional engineering practice, and when is it legally required?
  • What is the role of NESC in the context of electrical transmission and distribution?
  • The Code of Ethics takes effect upon approval by the ___?
  • Which frameworks govern export controls for electrical engineering hardware?
  • PSALM stands for what?
  • If a licensed engineer discovers misrepresentation in a client's project, what actions should they take?
  • GMC stands for which of the following?
  • Up to what kVA capacity and voltage rating does the regulation require only one registered master electrician?
  • Which topic is addressed in Article II of the Code of Ethics for Electrical Engineers?
  • The penalty clause specifies that violations may result in which two forms of penalties?
  • What is the purpose of the NFPA 70E arc flash boundary and approach boundaries?
  • Which document governs contracting for government electrical engineering projects, including competition and warranties?
  • What is the role of NCEES in engineering licensure?
  • DMC stands for which of the following?
  • Which two RA 7920 articles specify the ranges for 11-20 and 21-27?
  • What is the difference between neutral grounding and equipment grounding?
  • Who was chairman of the Board of Electrical Engineering when the Implementing Rules and Regulations of RA 7920 were adopted?
  • What is the term for the overall energy program formulated and updated yearly by the COE and submitted to Congress pursuant to RA 7638?
  • Which statement best describes the purpose of NFPA 70B?
  • RA 7920 Rule 2(f) is defining which of the following concepts?
  • A notice issued by the system operator when the contingency Reserve is less than the capacity of the largest Synchronized Generating unit or power import from a single interconnection whichever is higher.
  • What is a ground fault and why are GFCIs required in certain circuits?
  • What is the purpose of the service disconnecting means with respect to safety and code compliance?
  • How does statute of repose differ from statute of limitations, and how does it affect engineering claims?
  • What is the minimum age for a Board member at the time of appointment?
  • In RA 9136, SGC stands for which term?
  • In electrical systems, what is the difference between bonding and grounding, and why is it important for safety?
  • In EPIRA, PDC stands for what?
  • Who serves as the executive officer of the Board of Electrical Engineering?
  • Exemption from examination and registration granted foreign electrical engineers shall be good for how long?
  • What does backfeed refer to in a grid-connected PV system?
  • For qualified applicants for examination, notice of admission shall be issued not later than how many days prior to the first day of examination?
  • What does RA 9136 stand for?
  • Which examination is typically taken after gaining the required work experience toward PE licensure?
  • What is a change order and why is it critical in construction projects?
  • What is the concept of coordinated overcurrent protection in electrical systems?
  • The electric power industry was divided into four sectors by RA 9136 namely: generation, transmission, distribution, and ______.
  • Which of the following is NOT a typical reason for maintaining documentation in electrical projects?
  • What does PEMC stand for in the EPIRA framework?
  • In professional engineering practice, which statement describes who signs the seal on drawings?
  • In Section 40 of Article IV of RA 7920, the penalty for violating the provisions of this Act includes a minimum fine of not less than ______.
  • Which of the following is the primary use of arc-flash incident energy calculations?
  • Which of the following describes the imprisonment range specified in the penalty clause?
  • What does PRBEE stands for?
  • Which statement describes net metering and interconnection standards?
  • Which of the following is a ground for disqualification for the applicant for the REE licensure examination?
  • Which code is primarily concerned with electrical installations in buildings?
  • Which of the following is qualified as the Chairman of the Continuing Professional Development Council for Electrical Engineering?
  • What is the primary purpose of interconnection standards for grid-connected generation?
  • Why might a professional engineer refuse to perform engineering work for a client with known illegal activity?
  • GFCI protection is typically required in which locations?
  • What is the purpose of a certificate of compliance or calibration certificate in electrical test equipment?
  • Sec. 14(a)(iii) of Art. III. Examination and registration, states the prior to commencing of work the foreign professional shall secure special permit from the ________.
  • In RA 7920, CPE stands for which?
  • Also known as PRC Renewal Law
  • In REE board examination, the passing general average is 70 percent provided there is no grade below what percent in any of the three subjects?
  • Which federal act governs energy efficiency requirements for appliances and certain equipment in the U.S.?
  • Which president signed the proclamation declaring May as electrical safety month (as cited)?
  • In RA 9136, CREM stands for which of the following?
  • Which device senses current imbalance and interrupts the circuit to protect people from shock?
  • Which standard is used to determine incident energy for arc flash PPE and boundaries?
  • What differentiates a bonding jumper from a grounding electrode conductor (GEC)?
  • Which statement best describes the arc-fault circuit interrupter (AFCI)?
  • Which boundary concept helps determine PPE requirements and working distances in arc flash safety?
  • What is the difference between the seal of a Professional Engineer and the stamp used by a non-licensed designer?
  • What is the primary purpose of the National Electrical Code (NEC)?
  • Which statement best defines short-circuit current rating (SCCR)?
  • Which NEC article covers energy storage systems and where are they primarily covered?
  • Which statement about risk assessment in electrical workplaces is most accurate?
  • What does IEEE 519 address in power systems?
  • Which of the following best describes NFPA 70E arc-flash guidelines?
  • Explain the role of a functional specification in electrical engineering projects.
  • The executive officer of the Board of Electrical Engineering is __________.
  • Which body is responsible for selecting the recommendees used to fill board vacancies?
  • How does NEC address receptacle outlets in dwelling units in terms of location and spacing?
  • Which statement best describes the role of IECC in electrical design?
  • What distinguishes negligence from gross negligence in professional liability?
  • Name two core ethics principles from the IEEE Code of Ethics relevant to practice.
  • A Ufer grounding electrode is formed by embedding which component in concrete?
  • What is a Ufer grounding electrode?
  • What is the general purpose of NFPA 70B (Maintenance) in electrical systems?
  • What is the NSPE Code of Ethics' core duty to the public?
  • How should a professional engineer address indemnification in a contract?
  • Which NEC article covers receptacle outlets location and spacing in dwelling units?
  • How does the NEC treat solar photovoltaic systems in relation to utility interconnection?
  • How do cybersecurity standards apply to control systems in electrical utilities?
  • What is the primary purpose of a grounding electrode system?
  • What does NEC require about equipment rating in hazardous locations?
  • RA 7920 is the law governing electrical engineering; which statement is true?
  • In professional practice, what is the difference between "confidential information" and "public information," and how should a PE handle each?
  • Why is confidentiality important in electrical engineering practice?
  • What is the purpose of the National Electrical Code's requirement for appropriate overcurrent protection?
  • What are the typical elements of a professional service contract for an electrical engineering project?
  • On which documents is a seal typically required?
  • What is the difference between a "firm fixed price" and a "cost-plus" contract in construction?
  • Which topic is addressed in Article V of the Code of Ethics for Electrical Engineers?
  • Why is documentation and record-keeping critical in electrical projects?
  • What is the role of NEC 690 in PV installations?
  • The professional is required to renew license every ____ years upon payment of registration fees.
  • PSALM stands for which form?
  • Which document number is associated with the old Electrical Engineering Law?
  • RA 9136 is commonly referred to as which law?
  • What is the number of the act that governs Electrical Engineering?
  • CPE in RA 7920 stands for?
  • Which organization screens and recommends candidates for the Specialty Certificate?
  • What determines the required size of an equipment grounding conductor (EGC)?
  • Which statement best describes the difference between the practice of engineering and engineering services under licensure acts?
  • Which of the following best describes the primary scope of professional liability insurance (E&O) for engineers?
  • What is risk assessment in electrical projects, and which standards guide it?
  • What does arc rating indicate in personal protective equipment?
  • What is the significance of a lockout/tagout (LOTO) program in electrical safety?
  • After publication in the Official Gazette, how many days must pass before the Code of Ethics takes effect?
  • Which statement best describes the difference between tort and contract liability?
  • How does the Americans with Disabilities Act relate to electrical design in public buildings?
  • Article II of Code of Ethics for Electrical Engineers contains which SEC?
  • In procurement, what is the purpose of the "bonding" requirement?
  • Which OSHA regulation is most directly concerned with electrical safety in general industry?
  • Who selects the list of recommendees used to fill board vacancies?
  • RA 9136 has four sectors; which of the following is not included?
  • A contestable customer is defined as a customer with demand of at least how many MW, according to the Energy Regulatory Commission?
  • What is the safety objective of rapid shutdown for PV systems?
  • What is the primary purpose of a bonding jumper in an electrical system?
  • In a professional service contract, what is the purpose of change orders?
  • What is the maximum fine specified in the penalty clause of Section 40?
  • Which statement best describes the standard of care in professional engineering?
  • When is arc-rated personal protective equipment (PPE) required?
  • Which OSHA regulation(s) govern electrical lockout/tagout procedures and related electrical safety work practices?
  • What term is used for the assignment of duties in Article III, Rule 7 of RA 7920?
  • What does the general limit of approach (safety concept) in NFPA 70E define?
  • In a typical electrical system, where should the neutral be bonded to ground?
  • Vacancies of the Board of Electrical Engineering shall be filled by the ______ from the list of recommendees selected by the PRC commissioner.
  • What does the grounding electrode conductor (GEC) do in a power system?
  • What is the purpose of "record drawings" or "as-built drawings" in an electrical project?
  • DMC stands for what?
  • What is the purpose of interconnection standards like IEEE 1547?
  • Which NEC article handles grounding and bonding?
  • RA 7920 is the law governing the practice of which profession?
  • What is the primary benefit of maintaining a preventive maintenance program for electrical equipment?
  • Which organizations publish widely used standards for electrical safety in the workplace, and what is their relationship to law?
  • Who grants licensure to practice engineering in a U.S. state?
  • Rapid shutdown requirements for PV systems are specified in which NEC section?
  • What is NFPA 70E primarily concerned with?
  • What is the arc flash boundary and how is it determined?
  • What is as-built documentation and why is it important?
  • Foreign electrical engineers' exemption from examination is valid for how many months?
  • Which of the following is not a requirement to take the RME?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy